Differences

This shows you the differences between two versions of the page.

--- manpage:add_host [2009/02/16 23:18]
Ueli Heuer
+++ manpage:add_host [2009/11/11 21:27] (current)
@@ Line 1: / Line 1: @@
+====== add_host ======
+===== SYNOPSIS =====
+add_host.pl - add hosts to the DVG config database
+===== USAGE =====
+   Lists all matching templates
+       add_host.pl [--list regexp ]
+   Edit the matching templats
+       add_host.pl [--edit regexp ]
+   Add a new host to the dvg
+       add_host.pl [ ... option from below ... ]
+         --template  -> (*) host description
+         --name      -> (*) full qualified hostname (router1.dvgtool.org)
+         --community -> (*) snmp community
+         --location  -> (*) location where the host should added
+         --group     -> group where the host should added
+         --owner     -> OwnerId;
+         --rt        -> asset Tracker ID
+     Values with a (*) are mandatory
+===== DESCRIPTION =====
+add a host with predefined devices into DVG. The templates defines some basic features of the host (SNMP version, check this
+host, is this host activ). The devices are defined in a simmilar way.
+===== TEMPLATE =====
+Templates are stored in the directory $DVG_HOME/data/template/add_host/. \\
+Empty lines or lines starting with '#'  are ignored. \\
+A template looks like following example:
+        #!$DVG_HOME/bin/tool/add_host.pl
+        #
+        # $Id: add_host.pl,v 1.5 2007-08-19 22:19:24 ueli Exp $
+        #
+        # CISCO 1841
+        #
+        # Host
+        # 0:Typ:snmpversion:check:activ:HC:hardware:module
+        # Type -> as defined in table host_type
+        # Hardware -> as defined in table dvg_hardware(model)
+        # Module   -> the device module for this host as defined in dvg_modules(type=host)
+:Router:snmpv2c:y:y:y:Cisco 1841:device:
+        # Interfaces
+        #ord:name:probe:activ:params
+        # ord -> ordering of the entries
+        # name -> the name as shown in the UI
+        # probe -> as defined in the table probe
+        # activ -> [y|n]
+        # HC -> [y|n] (host has HC (64bit counters for the interfaces)
+        # params -> additional parameters as need defined in probe_params order as in the database
+:PING:Ping hostid:y:1:5:0:1:
+:CPU:CPU (cisco):y:100:102:
+:Datagram:forwarded Datagrams:y:10000000:10000000:
+:Memory I/O:memory (cisco):y:2:67108864:67108864:
+:Memory Process:memory (cisco):y:1:67108864:67108864:
+:vpdn:vpdn sessions:n:200:
+:Loopback0:loopback:y:
+:FastEthernet0/0:ifOctet ifError ifDrop ifPacket:y:#FastEthernet0/0:12500000:12500000:y:y:
+:Serial0/0:ifOctet ifError ifDrop ifPacket:y:#Serial0/0:256000:256000:y:y:
+:Serial0/1:ifOctet ifError ifDrop ifPacket:y:#Serial0/1:256000:256000:y:y:
+:Serial0/2:ifOctet ifError ifDrop ifPacket:y:#Serial0/2:256000:256000:y:y:
+:Serial0/3:ifOctet ifError ifDrop ifPacket:y:#Serial0/3:256000:256000:y:y:
+===== BUGS =====
+There could be some bugs. If you find one (or more) please report it to [[DVGTOOL>bugs]]
+  * you can add hosts without a valid FQDN This'll fail the dvg_snmp.pl daemon on restart :-(
+===== COPYRIGHT =====
+Copyright 2004 ... 2008  by Ueli Heuer <ueli at dvgtool dot org>
+{{tag>manpage add_host}}

manpage/add_host.txt · Last modified: 2009/11/11 21:27 (external edit)

Back to top